Craftsman 19.2 volt C3 Cordless Tools Review – Sorting Out The Mayhem

Almost too many Craftsman 19.2 volt tools.

Choice is great but sometimes it can be overwhelming.  With over 65 pieces, accessories and kits available in the Craftsman C3 19.2 volt  line, it can a real challenge to find and pick the tools that are right for you.  On top of the huge selection,  if you go to Sears.com or your local Sears you WILL NOT find all of the C3 19.2  items.  Some items are labeled wrong on the website and the stores do not carry all of the items.

This article is an attempt to organize the line for you.  Scroll down if you want to get right to the tools. For the thousands of you who already own a Craftsman C3 19.2 volt system you can see if your favorite drill or light is still available or if it has been upgraded to a better model.  I’ll also tell you about the gems and lead bricks in the line and let you in on a few new tools Sears says are coming soon!  Warning! This is one of the longest articles I have ever written.  It will take you a while to get through it and see everything available.

What is a “C3″?

C3 is Craftsman’s homeowner line of 19.2 volt cordless power tools.  The line is one of the most extensive in the home repair and home improvement industry and for most of us the best value for the money. The Craftsman C3 19.2 volt line of cordless tools has been going through quite a few revisions and updates in the last few months.  In light of the changes and new items coming out it’s time to review the entire line.

The best feature of this line is there are over 32 individual tools that all use the same 19.2 battery. (with many more to come in 2010)

The second best feature is Craftsman is dedicated to upgrading the line as new battery and motor technology becomes cost effective.  They are intent on keeping the same battery “platform” as far into the future as I can see.

The third best feature is you can order your new item online and in many cases walk into your nearest Sears store within the hour and pick the item up.  Right from your computer you can see if they have the 19.2 volt tool you want in stock.  If they don’t, you can order it, and pick it up when it comes in.  No need to make a special trip to the store to see if they have it and no need to make a trip just to order it if they don’t.

Is The C3 19.2 volt Line The Best? or do you really need a MACK dump truck when a good pickup does the job most of the time?

No.  Simply stated the C3 line is not the best line of cordless tools (just like a dump truck is better at hauling dirt than a pickup).  There are other lines of cordless tools out there that are more rugged (and expensive) But it is the best value for homeowners, tinkers and many repair techs. Other multi-tools lines of cordless tools like the Makita LXT line focus on the construction trades.  For example, many of the tools in the Makita line you would never need (concrete vibrator) or only need once (autofeed screwdriver) as a homeowner.  I personally like the Model# 2601-22 Milwaukee drill better than the Craftsman Compact Lithium-Ion Drill / Driver  Model 17310 , but the Milwaukee is much more expensive and the batteries only fit that drill and an impact driver (yet).  The Craftsman C3 19.2 batteries fit all the cordless tools I may want in the near future.

The 19.2 volt line is even a good value for contractors and builders who need a cordless tool, but don’t need to use it 10 hours a day, everyday.  An HVAC contractor recently told me: “I have about 40 of the 19.2 drills and they are very cost-effective for me.  My guys don’t use a drill that often, but they are really hard on them.  They throw them around, drop them, and lose them regularly.  The 19.2 volt is strong enough to do all their work and it doesn’t hurt my wallet as bad when I  have to replace them. ”  He was really excited about the new 4 place charger.

Another contractor wrote me after this article was published saying, “Some things about lines such as Craftsman C3 are inaccurate.  They say that they are not the best and only for home users.  I’m a contractor and I use the C3 line everyday.  I take offense to someone saying they arent rugged enough.”  I don’t have a problem saying, “Thank you, I was wrong!”

Here is a teaser from Craftsman on what is coming out soon! Click on the link to see a video of the Craftsman Garage at the International Builder’s Show!

New Craftsman Tools at IBS ‘10! Watch the complete video to see a few of  the new 19.2 tools.

Ok, Let’s get to the tools!

I am going to organize them into the following categories: Drill/Drivers, Impact Drivers, Combo Kits, Batteries, Chargers, Lights, Wood Working Tools, Automotive, Lawn & Garden,  Accessories

Please Note: I believe I got all the specs right.  The information here is taken from Sears.com, and I looked at the actual boxes at my local Sears.  But some of the online descriptions are so cryptic that I may have gotten a few wrong.  If you don’t get exactly what you want, just return the item within 90 days to your local Sears and order a different model.  If you find a mistake, please leave a comment at the end of the article and I will correct it. I will also update this list as new items come out. One last note: Sears changes this line a lot.  If the price you see on their website ends in 88 it is a closeout and is only available while supplies last.

You can click on any “Model Number”  in this article and go to Sears.com to read more and purchase these tools.  If the model number will not click to Sears it is not available online yet. You can purchase it online and pick it up at your nearest Sears store. If you buy the saw online from them I will get a commission from the sale.  It is my way of paying for this site. I get no other compensation from SHC for this review.

Drill/Drivers:

It is in your best interest to purchase the Drill/Driver with battery and charger first.  (Or a combo kit IF it has the tools you need) The drills usually have the best sales.  The model 17310 gives you a great start with a light weight compact lithium battery and multi-chemistry charger so you can add on as you need to.

Craftsman 19.2V C3 Compact Lithium-Ion Drill / Driver  Model 17310

This is the best drill in the line right now. 340 in-lbs of torque. 1/2 in. single sleeve keyless chuck. 2-speed gear box. 24 position adjustable torque clutch. One Model 11371 Lithium Battery. One Model 25926 Multi-Chemistry Charger.  It is the new compact frame, lightweight, high torque model.  It compares nicely to the DeWalt and Milwaukee compact drills.  For 90% of us homeowners this is exactly the drill we need.  I highly recommend this drill.

Craftsman 19.2 Volt C3 Drill Driver Model 17191

You probably don’t want this drill! Torque not listed (but about 100 in/lbs.) 3/8 in. chuck. 0 -- 650 rpm. single speed gearbox. 24 position adjustable torque clutch. One Model 11375 NiCad  battery and a one Model 11041 NiCad ONLY charger. It is a single speed, low power drill, with one cheap battery and charger.  It is good for putting up curtain rods and that’s about it.

1. Craftsman C3 19.2 volt DRILL/DRIVER Model 11588

The most popular drill in the line! 410 in/lbs torque. 1/2-inch keyless chuck. 2-speed gearbox. 24-position adjustable torque clutch. Horizontal and vertical bubble levels. Includes two Model 11375 NiCad batteries, 1-hour nicad only charger.

2. Craftsman C3 19.2 volt DieHard Cordless Drill/Driver with Light Model 11542

The Strongest Drill in the line! 420 in/lbs torque. 1/2-inch keyless chuck. 2-speed gearbox. 24-position adjustable torque clutch. Horizontal and vertical bubble levels.Includes two Model 11375 NiCad batteries, 1-hour nicad only charger. Removable assist handle.  Also includes Work Light Model 11391

3. Craftsman C3 19.2 volt Right Angle Drill/Driver Model 11576

Right Angle Drill.  Most of your will like the new impact drivers for tight spaces instead of this drill. 150 In./Lbs. 3/8 in chuck. Single speed gearbox.0-1050 RPM Braking switch stops chuck quickly for easier, faster operation. No torque adjustment.  This is an “add on” and does not come with batteries or charger.

4. Craftsman C3 19.2 volt DieHard Cordless Drill/Driver Model 11581

Add on version of the Model 11542 kit.  Does not come with batteries and charger

5. Craftsman C3 19.2 volt Hammer Drill/Driver Model 11580

Add on version of the Model 11543 Kit. Does not come with batteries and charger.

6. Craftsman C3 19.2 volt Cordless Hammer Drill/Driver Model 11543

Hammer Drill! 410 in/lbs torque. 1/2-inch keyless chuck. 2-speed gearbox. 24-position adjustable torque clutch. Horizontal and vertical bubble levels. Removable handle and depth rod. Includes two Model 11375 NiCad batteries, 1-hour nicad only charger.

7. Craftsman C3 19.2 volt Drill / Driver Model 11551

3/8 inch high torque drill. 410 in/lbs torque. 3/8-inch keyless chuck. 2-speed gearbox. 24-position adjustable torque clutch. Horizontal and vertical bubble levels. Removable handle and depth rod. Includes two Model 11375 NiCad batteries, 1-hour nicad only charger.

Impact Drivers:

There are two impact drivers (woodworking) in the line right now.  Don’t confuse these with the Model 17090 impact wrench (automotive). The newest Model# 17080, 17338 has 1500 inch/lbs and the older one that comes in the Model 11550 kit has 900 in/lbs.  The newest one has TWICE the torque as the one in the kit.

8. Craftsman C3 19.2 volt Combo Kit, Drill/Driver & Impact Driver Model 11550

Good Value Kit! Comes with a Model 11551 3/8 Drill and a 900 inch/lbs impact driver.  This is a great around the home kit.  Includes two Model 11375 NiCad batteries, 1-hour nicad only charger.

9. Craftsman C3 19.2V Impact Driver Kit Online only Model 17338

Newest and most powerful impact! But why they didn’t include a lithium battery and charger is beyond me.  1,500 in. lbs of torque and 0 -- 3,500 Impacts Per Minute. Includes two Model 11375 NiCad batteries, 1-hour nicad only charger.

10. Craftsman 19.2V C3 Impact Driver Add On Model 17080

Best Value! Add on version of the 17080 kit. Buy this to go with your 17310 drill.  1,500 in. lbs of torque and 0 -- 3,500 Impacts Per Minute.

Combo Kits:

11. Craftsman C3 19.2 volt Cordless Combo Kit with RA Drill Model 11548

Cordless combo kit with a 19.2 volt with the 1/2 inch Model 11551 drill/driver, a Model 11576 right angle drill,  2 battery packs, 1-hr. charger, and storage case.

12. Craftsman C3 19.2 volt 4 pc. Combo Kit Model 11404

4 Pc. Kit includes: 1/2 in. Model 11551 Drill/Driver,  Model 11429 or 11578 Trim Saw, Model 11579 Reciprocating Saw , Model 11407 Fluorescent Light,  2 battery packs and 1-hr. charger.

13. Craftsman C3 19.2 volt 4 pc. Lithium-Ion Combo Kit Model 11644

Exclusive 19.2-volt lithium-ion powered C3 tool combo includes a 1/2-inch drill/driver with over 420 in.lbs. torque, 2-speed gear box (0-400/0-1,400 rpm), 24-position adjustable torque clutch, built-in LED and assist handle, full-size 7 1/4 in. circular saw with front and rear lasers, impact driver with over 900 in.lbs. torque, built-in LED and quick-release 1/4-inch collet and reciprocating saw with 7/8 in. blade stroke, variable speed (0-3,100 spm), built-in LEDs, tool-less blade clamp and adjustable foot. Includes two 19.2-volt DieHard lithium-ion batteries, 1-hour lithium-ion charger and large tool bag. Lithium-ion batteries and charger are compatible with all Craftsman C3 add-on tools. Wt. 26 lbs. Catalog/Online Exclusive

14. Craftsman C3 19.2 volt 6 pc. Cordless Combo Kit with Multiple Tools Model 11499

1/2 in. drill/driver (11541), trim saw (11516), reciprocating saw (11574), jig saw (11428), RA drill (10154), and fluorescent light (11407) -- plus 3 19.2 volt battery packs, universal charger, and 2 AAA batteries for trim saw laser. Laser mounted on upper guard for easier, more precise cuts. LED light -- improves visibility by illuminating the work area.

15. Craftsman C3 19.2 volt 5 pc. Combo Kit Model 11445

5 Pc. Kit includes: 1/2 in. Drill/Driver with 2-Speed (0-400 / 0-1400 rpm) Gear Box & 1/2 in. keyless chuck; Trim Saw with 4500 rpm & 5-1/2 in. carbide blade; Reciprocating Saw with variable speed (0-3100 spm) & 7/8 in. blade stroke; Impact Driver (without LED worklight) with variable speed (0-2500 rpm / 0-3000 bpm) & 1/4 in. hex collet; Fluorescent Light.

16. Craftsman 4 pc. 19.2V Combo Kit Model 17410

Be Careful buying this set!  It only comes with one battery and a 24 hour slow charger.  Plan on buying a good charger immediately! The charger included with this kit will cook your batteries if you leave them plugged in! This was a 2009 Christmas leader item and they have a few left on clearance.  It’s a good value if you know you will have to buy a good charger and additional batteries.  This Craftsman C3 19.2-Volt 4pc Combo Kit comes with a 3/8 in. Drill/Driver, 5 1/2 in. Trim Saw, work light and vacuum; all powered by an included DieHard® 19.2V NiCd battery with charger. 10 pc. screwdriver bit set.

Batteries/Chargers:

17. Craftsman 4 Port Multi Chemistry Charger Sears Model 17311

If you need a new charger or you have more than two 19.2 batteries this is the MUST HAVE accessory! You have to have this charger if you want to get long life out of your existing Nicads.  No need to remove batteries from charger anytime. Smart charging system will not overcharge batteries.  Charges 19.2V battery packs to full capacity in 1-hour or less per port. Battery packs stored on the charger are systematically checked and charged to ensure optimal performance. After charging and maintaining all batteries the charger enters into sleep mode to conserve energy. After 5 days of continuous sleep mode, charger automatically checks battery status and charges if needed. Status allows user to check the charge status of the battery packs when charger has entered sleep mode. It hangs on the wall to help keep your work area organized. Quick release bracket lets you take the charger with you to a work area. Allows for easy transport of battery packs and charger. Batteries lock securely into place during storage or transport. Charges all 19.2V NiCd and Lithium batteries. Includes wall mount bracket.

• Charge up to 4 battery packs
• Energy Star rated.
• Wall Mount Bracket
• Convenient Carry Handle
• Multi-Chemistry.  Handles both Lithium and Nicad 19.2 volt batteries.

18. DieHard C3 19.2 volt Lithium-Ion Battery Pack Model 17374

Latest innovation in power tools. Li-Ion produces a longer run time, more power and better performance in extreme temperatures. It also has a low discharge rate when not in use meaning it will minimize having to charge the battery before use. The new Li-Ion batteries include a push button fuel gauge on the front of the battery indicating the amount of power remaining. As the battery is used, the indicator will glow green, yellow and then red to indicate it is time to recharge. Will fully charge in only one hour with the new and improved charger. This battery REQUIRES the use of the new and improved charger (#25926). Increases the performance and run time of all the Craftsman C3 tools. Some up to a 200% increase over their Ni-Cad counterpart.

19. Craftsman C3 19.2 volt Lithium-Ion Battery Charger Model 25296

19.2 Volt Lithium-Ion Battery Charger provides constant power throughout the charge. This new and improved charger will charge the 19.2-volt Lithium-Ion batteries in one hour. This unit will also charge Ni-Cad batteries, originally charged by the #11041 charger, in only 45 minutes. This is the ONLY charger that will charge the new Lithium-Ion battery (#11374). Works with all Craftsman C3 power tools!

20. DieHard C3 19.2 volt Lithium-Ion Battery Pack and Charger Model 25928

Latest innovation in power tools. Li-Ion produces a longer run time, more power and better performance in extreme temperatures. It also has a low discharge rate when not in use meaning it will minimize having to charge the battery before use. The new 19.2-volt lithium battery (#11374) will increase the performance and run time of all the Craftsman C3 tools. Some up to a 200% increase over their Ni-Cad counterpart. Li-Ion batteries include a push button fuel gauge on the front of the battery indicating the amount of power remaining. As the battery is used, the indicator will glow green, yellow and then red to indicate it is time to recharge. Battery will fully charge in only one hour with this new and improved charger. This new battery (#11374) REQUIRES the use of the new and improved charger (#25926). This new and improved charger will charge the 19.2-volt Lithium-Ion batteries in one hour. This unit will also charge the Ni-Cad batteries originally charged by the #11041 charger in only 45 minutes.

21. Craftsman 19.2-Volt Compact Lithium-lon Power Pack Model 11371

Latest innovation in power tools. Lithium-Ion technology produces a longer run time, more power and better performance in extreme temperatures. It also has a low discharge rate when not in use meaning it will minimize having to charge the battery before use. The new compact Lithium-Ion battery Dual battery fuel gauge. Simply press the button on the front of the battery and the fuel gauge on the front and in the stem of the battery and the indicator will glow green, yellow and then red to indicating the amount of power remaining. The new compct lithium-Ion battery will fully charge in only 30 minutes with the use of the new and improved charger, 25926 (this battery REQUIRES the use of the new and improved charger). The new 19.2-volt compact Lithium-Ion battery will increase the performance and run time of all the Craftsman C3 tools. Some up to a 200% increase over their Ni-Cad counterpart. The Compact Lithium-Ion battery is compatible with over 25 C3 tools.

22. Multi-Chemistry 19.2 volt in vehicle charger.  Model 17290  Charges your 19.2 nicad and lithium batteries from a 12 volt source.

All the chargers below this line will only charge the Nicads.  To use the new lithium batteries you will have to purchase a smart charger from the assortment above this line!

23. DieHard C3 19.2 volt Replacement Nicad Batteries (2 pk. of the 11375.) Model 11376

24. DieHard C3 19.2 volt Replacement Nicad Battery Pack Model 11375

Replacement Nicad battery for use with most 19.2 volt Craftsman products.  If you are not ready to switch to Nicads this is the correct battery.  Watch the sales.  This and the 2 pk. go on sale regularly.

25. Craftsman Universal Charger for 18V  Model 11041

This charger is labeled wrong on Sears.com.  It is  the charger that came in most of the kits sold with nicad batteries in the last few years.  One our charge time. This charger will not charge the new lithium batteries!

26. DieHard C3 19.2 volt Replacement Batteries (2 pk.) and Charger Model 11377

Two replacement DieHard style batteries (#11375) and a charger (#11041).

27. Dual Port Universal Charger Model 11573

Charges two Nicad batteries at once.

28. 19.2 in-Vehicle Charger Model 11572

12 volt charger to charge your 19.2 volt Nicad batteries.  For all the ranchers, ice fishermen, and Amish Friends.

29. Craftsman 19.2 volt Charger Model 11113

I understand that the very first 19.2 volt tools used a battery with external terminals.  If the old kit you own has the external terminal battery this is the replacement charger.  Don’t buy this charger if you batteries look like the ones listed in this article.

From here on through the end of this list of 19.2 volt tools assume it does not come with a battery and charger.  Buy a drill, or kit and then add these tools as you need them!

Lights:

30. Craftsman C3 LED Light Model 17601

High Intensity LED features a 180 degree rotating head that allows for light at different angles. Hanging hook provides the ability to hang the LED light anywhere, 7 times longer runtime, 50,000 hours of  bulb life, compact and lightweight. Battery and charger sold separately.

31. Craftsman C3 19.2 volt Fluorescent Light Model 11407

Emits a soft light over the entire work area. Shock-absorbent boot helps protect the tube upon impact. Folding hang hook, lanyard for ease of carrying.

32. Craftsman Replacement Fluorescent Tube for Craftsman 19.2 volt Worklight #11407 Model 11212

33. Craftsman C3 19.2 volt Cordless Spotlight Model 11593

High intensity, 19.2v cordless spot light produces 8,000 LUX and will run up to 30 minutes on a single charge. The C3 Cordless Spot Light features a lock-on switch for hands free operation as well as an overmold grip and impact resistant housing for durability.

34. Craftsman C3 19.2 volt Work Light Model 11391

19.2 volt work light with a 180 degree pivoting head, overmold grip and switch, and high-intensity bulb. I highly recommend you buy 2 or 3 additional bulbs right away for this light.  Everyone loves this light but it eats bulbs regularly.

35. Craftsman Replacement Krypton Bulb for Craftsman 19.2-volt Worklights Model 11213

Wood Working Tools:

36. Craftsman C3 19.2 volt 5 1/2″ Circular Saw Model 11429

1-9/16-in Depth-of-cut @ 90 degrees. The 5 1/2-in thin kerf. The depth of cut @ 45 deg is 1-1/8″”.  4500 RPM. Spindle lock.

37. Craftsman C3 19.2 volt DieHard Cordless Trim Saw Model 11578

Same saw as the 11429 just different packaging.

38. Craftsman C3 19.2 volt Jig Saw with Laser Trac Model 11569

Laser Trac™ . Trigger controlled variable speed (0-1200 SPM), 4 orbital cutting positions, 1-in. blade stroke, tool-less blade clamp, overmold handle, tilt base, and on board blade storage. 1 inch blade stroke. T-Shank blade type. Adjustable base tils 45 deg. left or right for bevel cuts

39. Craftsman C3 19.2 volt Cordless Planer Model 11584

19.2 volt planer. 10,000 rpm. Adjustable plane depth, chip exhaust and removable dust bag, grooved front shoe design. Automatic surface guard. Capacity: 2 in. Includes 2 blades, edge guide, rabbet guide, blade wrench and dust bag and owners manual.

40. New, Here Now! One Handed Recip Saw!  Model 17600.

41. Craftsman C3 19.2 volt DieHard Reciprocating Saw with LED Model 11579

19.2 volt reciprocating saw with variable speed (0-3100 SPM) 7/8 in. blade stroke. 1/2 in. universal shank blade (2 included). Tool-less blade clamp. Overmold handle and grip for added control and comfort. Adjustable shoe. LED improves visibility for improved illumination of work area. Includes manual, 2 blades, wrench.

19.2V Motor -- power for heavy work

Variable speed 0-3100 SPM -- for fast cutting in a variety of materials

Heavy duty extra long Trigger switch w/lock-off -- controls variable speeds, lock-off helps prevent accidental starts

7/8-in. Blade stroke -- for fast cutting and long blade life

Tool-less blade clamp -- change blades with no tools

Removable battery pack -- supplies power for many jobs

Overmold handle & grip -- for added control and comfort during extended use

Adjustable shoe -- ease of control when starting cuts

LED -- improves visibility by illuminating work area

Includes -- Saw, 2 (1/2-in. Universal shank) blades, and Manual

42. Craftsman C3 19.2 volt Pad Sander Model 11570

Powerful pad sander offers 11,000 OPM (no-load speed). Triangle pad position lets you get into corners and other hard-to-reach places. Sealed on/off switch keeps out dust. Includes sandpaper (1 each: 60, 120, 40 grit), manual. Battery not included.

11,000 OPM (No Load Speed) -- for fast material removal and smooth finish

Triangle pad design -- for getting into corners and hard to reach places

Sealed On/Off switch -- conveniently located and sealed to keep out dust

Uses 19.2V battery -- same battery used on many Craftsman items (Sold Separately)

43. Craftsman C3 19.2 volt Cordless Spiral Saw Model 11582

Cordless spiral saw with a no-load speed of 22,500 RPM. 1/4 and 1/8 in. collets, spindle lock, and removable auxiliary handle. 1 in. depth-of-cut adjustment. Overmold body and handle for user comfort. Includes auxiliary handle (removable, w/cap), 2 bits, circle guide, wrench, allen key, manual.

22, 500 RPM (No Load Speed) -- for fast and efficient cutting

1/4-in. and 1/8 in. Collets -- to accept bits for a variety of applications

Spindle lock -- for quick bit changes

Removable aux. handle -- for added control

1-in. Depth-of-Cut adjustment -- for cutting in various materials

Overmold body and handle

44. Craftsman C3 19.2 volt 7-1/4 in. Circular Saw with Laser Model 11585

This 7-1/4 in. circular saw from Craftsman features dual lasers integrated into the upper blade guard. The forward laser indicates the cut line to help you accurately follow the cut mark. The rear laser helps line up plunge cuts as well as helping to keep the saw aligned with your cut. The saw operates at 3600 RPM, has bevel capability up to 51.5 degrees, spindle lock, lock-off switch, and aluminum guards.

• Powerful 19.2V motor is mighty enough to easily cut 2X framing
• Easily cuts through 2X materials, shelving board and sheeting with one pass
• 3600 RPM -- faster, cleaner cuts through a variety of materials
• Accurate angle cuts up to 51.5 deg.
• Spindle Lock locks arbor for fast, easy blade changes
• Lock-off switch prevents accidental starting
• Die cast aluminum upper blade guard provides added strength and durability
• 24-tooth carbide-tipped blade for smooth, clean cuts

Automotive:

45. Craftsman 19.2V C3 Mechanics Combo Model 17229

This Craftsman C3 19.2-Volt Mechanics Combo includes (1) 1/2 in. Compact Lithium Drill, (1) Impact Wrench, (1) Full Size Lithium Battery, (1) Compact Lithium Battery and (1) Multi-Chemical Charger. The 1/2 in. compact drill offers a lightweight, ergonomic design with a robust motor offering up to 340 in-lbs of torque when powered by the compact 19.2V Lithium Die-Hard battery. It is equipped with a 2-speed gear box and 24 position adjustable torque clutch along with an LED light that illuminates when the trigger is pulled. The impact wrench has a powerful motor generating 0-3000 RPM no load for tightening or loosening various nuts / bolts along with its impact mechanism that allows you can focus on heavy duty applications producing up to 200 ft-lbs of torque. It has a 1/2 in. socket anvil for easy and secure socket connections. Included is a socket extender for use in hard to reach areas. Both the full size and compact lithium Die-Hard batteries are equipped with two energy indicators, one on front and one that illuminates the C3 Logo within the handle of the drill. Energy indicators turns from green to yellow to red indicating the battery’s energy level.

• Drill / Driver: 1/2in Single Sleeve Keyless Chuck. 24-position Adjustable Torque Clutch with Overmold. 0-440 rpm High Torque Application. 0-1600 rpm High Speed Application. Bubble Level on Top of Drill. Forward Reverse Switch. Built in LED light. Over mold on handle. Ergonomically Designed for comfort. Light Weight, Compact Design. 2 Screwdriver Bits.
• Impact Wrench: 1/2in Socket Anvil. Variable Speed 0-3000 rpm. 0-3000 impacts per minute. 200ft lbs of torque. Forward Reverse Switch. Built in LED light. Over mold on handle. Ergonomically Designed for comfort. Light Weight, Compact Design. Socket Extender.
• Batteries / Charger: (1) Compact Lithium Die-Hard Battery. (1) Full Size Lithium Die-Hard Battery. (1) Multi-Chemistry Charger.

46. Craftsman C3 19.2V Wrench Kit Online only Model 17339

Kit includes (2) 19.2V battery packs powered by DieHard, a one-hour charger, socket extender, and bag.

The powerful 19.2V motor allows for 0 -- 3000 RPM. No load speeds and tightening or loosening of various nuts/bolts. The impacting mechanism produces 200 ft. lbs of torque and 0 3,000 Impacts Per Minute to easily drive long screws or lag bolts. Wrench has 1/2-in. socket with pin retention for easy and secure socket connections. The mid-handle design with over-mold ensure balance and comfort. Bright LED light illuminates as the trigger is pulled. The LED provides ample light when working in dimly lit conditions. Works with 19.2- Volt battery packs powered by DieHard.

47. Craftsman 19.2V C3 Impact Wrench Add-On Model 17090

The powerful 19.2 volt motor allows for 0-3000 RPM no load speeds and tightening or loosening of various nuts/bolts. The impacting mechanism produces 200 ft. lbs. of torque and 0-3000 impacts per minute to easily drive long screws or lag bolts. Wrench has 1/2 in. anvil with pin retention for easy and secure socket connection. The mid handle design with over-mold ensures balance and comfort while the included auxiliary handle provides control when using the drill. Bright LED light illuminates as the trigger is pulled. The LED provides ample light when working in dimly lit conditions. Works with 19.2 volt battery powered by DieHard®. Batteries and charger sold separately. Wrench comes with socket extender and operator’s manual.

• 1/2 in. Socket Anvil
• Variable Speed 0-3000 rpm
• 0-3000 impacts per minute
• 200 ft. lbs. of torque
• Forward/ Reverse Switch
• Built in LED light
• Over mold on handle
• Ergonomically designed for comfort
• Light Weight, Compact Design
• On board bit storage

48. Craftsman C3 19.2 volt Orbital Buffer / Polisher Model 11597

Barrel grip body makes it very comfortable for buffing and polishing in different positions. The handle helps the user extend the buffer/polisher when needed for buffing or polishing a hood or roof of a car or truck. Powerful motor driven by the 19.2-volt DieHard battery. Previously sold 19.2V ‘EX’ batteries will also work for all the C3 tools. Provides for a professional swirl free finish. Conveniently located slide switch makes it extremely easy to turn the buffer/polisher on and off for start ups or during operation while shutting down. Includes Buffer/polisher, Application bonnet, polishing bonnet, and operators manual.

Lawn & Garden:

49. Craftsman 19.2V C3 Chain Saw Model 34130

This 19.2V Chain Saw gives you the power you need, yet is lightweight and compact. This tool is very simple to use. It offers a push button oiler that keeps the chain lubricated. With the convenient oil window you will know at a glance when it is time to add more oil. The over mold on the handles help to reduces user fatigue and increasing comfort. This tool is part of the C3 platform that offers over 25 tools all powered by one 19.2 volt battery. This tool can be operated with Ni-Cd or Lithium-ion batteries. Included with this tool (1) 19.2V Ni-Cd Battery, 1 hour charger, 10″ blade, blade cover, Allen wrench and owners manual. Takes #36510 as replacement chain.

• Light weight
• Compact
• Push Button oiler
• Oil Window
• Over mold on handle
• powered by 19.2V battery
• One tool that has 25 other tools that can be used with this battery
• charger and battery included

50. Power Paint sprayer Here Now! Model 17597.

Handles all paints and stains.  Advanced delivery system eliminates the need to dilute paint. Three spray patterns. Quiet.  Does not come with batteries or charger.

51. Chemical Sprayer Here Now!  Model 17599.  Powerful 19.2 pump. Spray wand locks into the handle for convenient one handed use. Brass wand and nozzle. Nozzle adjusts.  One gallon tank. Does not come with batteries or charger.

52.

53. String trimmer Coming Soon!

54. Hedge trimmer Coming Soon!

55. Leaf blower/vac. Coming Soon!

Other Accessories:

56. Craftsman Personal Fan Model 11595

2 speed motor, pivoting base. For indoor and outdoor use.

57. Paint Sprayer Coming Soon!

58. Craftsman C3 19.2 volt Workshop Blower/Vac Model 11592

Compact, lightweight and powerful, this versatile unit operates as a 100 mph blower as well as a portable vacuum. Features a variable-speed dial. Includes dust bag, 6 and 18 in. nozzles, crevice and brush attachments and 4 ft. hose. Wt. 6.31 Lbs.

59. Craftsman C3 19.2 volt Cordless Inflator Model 11586

This 19.2 volt inflator from Craftsman is designed to inflate automobile tires, sports balls, beach toys, etc. The backlit digital readout allows you to preset the desired pressure for the application and will shut off automatically when it reaches that point (up to 40 PSI). No need for a pressure gauge! Will inflate up to 2 car tires on a single charge. Onboard storage is provided for popular adapters to keep them accessible. Provides up to a maximum of 200 PSI of pressure. Includes tire chuck and 3 nozzles.
Battery and charger sold separately.

60. Craftsman C3 19.2 volt Hand Vac Model 11571

19.2 volt hand-held vacuum with bagless operation and a quick-change filter. Includes crevice tool and brush attachment.

19.2 V Motor -- powerful but portable for use in home, shop or car

Bag-less -- just push button to open and empty

Filter -- quick change filter for easy changes

Includes -- crevice tools & brush attachment

61. Craftsman C3 19.2 volt AM/FM/Weather Radio Model 10126

Built to perform in the toughest circumstances, this unit is much more than a radio. Complete with AM/FM radio, 7 weather-band frequencies, MP3 connection with 10 in. MP3 cable and digital display. Uses C3 19.2 volt battery pack. Offers 7+ hours of run time. 2 lbs.

• AM/FM/Weather Band (7 weather channels)
• PLL Digital Tuning -- Tuning and volume knobs; tuning knob also controls seek function
• Low voltage indicator, auxiliary input jack
• MP3 Player input; Bass port, 92mm -- 8 ohm; 3-watt speaker

62. Craftsman C3 19.2 volt DieHard Cordless Stapler Model 11577

Powerful 19.2 volt cordless stapler with lock-off switch and safety interlock to prevent inadvertent firing. Fires 40 staples per minute, driving 6 different lengths of 3/8 in. crown staples -- including: 1/4, 5/16, 3/8, 17/32, 1/2, and 9/16 in. Ergonomically designed handle.

• Powerful 19.2 volt motor
• Lock-Off switch and safety interlock
• Fires 40 staples per minute -- 6 lengths of 3/8 in. Crown staples: 1/4, 5/16, 3/8, 17/32, 1/2, and 9/16
• Depth adjustment knob -- changes driving force/depth for use in a variety of materials
• Ergonomically designed handle -- molded-in comfort grip
• 19.2 Volt -- Nickel-cadmium rechargeable battery required
• Includes: Brads

Compatible with the following Craftsman Staples.

• 009-74411 1/4 in., 1000pk. Chisel Point
• 009-74412 3/8 in., 1000pk. Chisel Point
• 009-74413 1/2 in., 1000pk. Chisel Point
• 009-74414 5/16 in., 1000pk. Chisel Point
• 009-74415 9/16 in., 1000pk. Divergent Point
• 009-74423 3/8 in., 5000pk. Chisel Point

63. Craftsman C3 19.2 volt Caulk Gun Model 11596

Caulk gun powered by a 19.2 volt Diehard battery. Features a variable speed selector, overmold grip, all metal plunger rod and on board puncture tool. Over 500 lbs. of force.

64. Craftsman C3 19.2volt Wet-Dry Vac. Model 17598